Formulating the cutting path for the inclined bed CNC lathe
Time:
Nov 27,2023
The inclined bed CNC lathe is more expensive than ordinary machine tools, and it is not cost-effective to only process simple processes. Therefore, more complex processes are usually arranged on CNC lathes, and even difficult to process processes on ordinary machine tools
The inclined bed CNC lathe is more expensive than ordinary machine tools, and it is not cost-effective to only process simple processes. Therefore, more complex processes are usually arranged on CNC lathes, and even difficult to process processes on ordinary machine tools. The programming of CNC lathe machining is more complex than the programming of ordinary machine tool process specifications. This is because issues that do not need to be considered in the processing technology of ordinary machine tools, such as the arrangement of work steps within the process, determination of tool alignment points, tool change points, and tool routing, cannot be ignored when formulating the CNC lathe processing technology.
When designing the cutting path of an inclined bed CNC lathe, the following factors are mainly considered:
1、 For CNC lathes used for point machining, it is important to consider shortening the tool path as much as possible to reduce idle time and improve machining efficiency.
2、 To ensure the roughness requirements of the workpiece contour surface after machining, the final contour should be arranged for the last continuous cutting.
3、 The forward and backward cutting path of the inclined bed CNC lathe tool should be carefully considered, and efforts should be made to avoid stopping the tool at the contour or vertically cutting the workpiece.
4、 When milling enclosed concave contours, the cutting tool's entry or exit does not allow for extension, and can be selected at the junction of both sides.
5、 It is crucial to develop a reasonable rough machining route for the machining of rotating parts and inclined bed CNC lathes.
Keywords:
What is a CNC lathe? How to solve the problem of CNC lathe machining
2024-03-01
Wedge-Type Y-Axis CNC Lathe VS Real (True) Y-Axis CNC Lathe
2023-12-21
In CNC milling, down milling or up milling?
2023-12-21